Free water analysis — Request yours →

Field engineer inspecting water treatment controls
Water Treatment Controllers & Remote Monitoring

Catch the problem the day it starts, not the month after.

A treatment program is only as good as the controller running it. When a sensor drifts or a bleed valve sticks, the controller keeps feeding chemical based on bad numbers, and nobody knows until scale or corrosion shows up. Hydrovida specifies, installs and calibrates cooling tower, boiler and closed loop controllers, and with remote monitoring we can see your systems between visits.

Signs your controller isn't doing its job

  • Conductivity readings that haven't changed in weeks
  • A bleed valve that runs constantly, or never
  • Chemical tanks emptying faster or slower than they should
  • Alarms that have been silenced or ignored
  • Scale or corrosion showing up even though the program "looks fine"
  • A controller nobody on site knows how to read

What a bad controller costs you

Water.

A stuck-open bleed or drifting conductivity sensor sends clean water down the drain all day.

Scale and corrosion.

A stuck-closed bleed or a failed feed pump lets cycles climb and chemistry fall out of range.

Chemical.

Feeding on bad readings means overdosing some weeks and underdosing others.

Time.

Without data, every problem gets found late, after the damage is done.

Remote monitoring: eyes on your systems every day

Remote monitoring gives you and your Hydrovida account team live access to conductivity, pH, ORP and inhibitor levels. When something drifts, we see it right away and fix it before it becomes scale, corrosion or a Legionella risk, without waiting for the next visit.

  • Live readings from your phone or computer
  • Alerts when a reading goes out of range
  • A history you can show auditors and engineers
  • Faster fixes, because we often know what's wrong before we arrive

Hardware we install and service

We specify and service the platforms already common in California central plants, and quote replacements when existing units fail.

  • ProMinent Aegis X controllers (NEMA 4X rated)
  • Walchem Intuition-6 cooling tower controllers
  • Pyxis PTSA fluorometers and inert-tracer control
  • pH, conductivity, ORP and flow sensors
  • Chemical metering pumps and dry-contact relay control
  • Bleed solenoid valves and dual-containment chemical tanks

How a controller project works

  1. 01

    Assess.

    We review your current controller, sensors, pumps and feed setup.

  2. 02

    Quote.

    Controller replacement is quoted as its own project, with a clear scope.

  3. 03

    Install.

    We handle the hardware, plumbing tees, sensor installation and program setup. Your site supplies a 120V GFCI circuit and any electrical or conduit work.

  4. 04

    Commission.

    We calibrate every sensor, set control points to your water and train your staff.

  5. 05

    Maintain.

    Sensors are inspected and calibrated on every service visit.

Rebates can cover part of a new controller

Many California water agencies offer rebates on water-saving equipment for businesses, including cooling tower conductivity controllers. In Southern California, the SoCal Water$mart program offers commercial rebates through participating local water agencies. In the Bay Area, Valley Water runs a Water Efficient Technologies program for businesses. Programs, amounts and eligibility change, and many require approval before you buy, so we check what's available for your site and help you with the paperwork.

Where we install and service controllers

San Diego County, Los Angeles and Orange County, the Inland Empire, Imperial Valley, the Central Valley, the Bay Area and Sacramento, plus Yuma, Reno and Northern Mexico.

Questions

Questions

How often should controller sensors be calibrated?

Conductivity, pH and ORP sensors drift over time. We inspect and calibrate them on every scheduled service visit.

Can you work with our existing controller?

Usually, yes. We service the major platforms. If a unit is failing or obsolete, we quote a replacement.

What do we need to provide for an installation?

A 120V GFCI circuit and any electrical or conduit work. We handle the hardware, plumbing, sensors and setup.

Do I need remote monitoring?

It's most valuable for large towers, critical plants like hospitals and data centers, and sites that are hard to visit often. We'll tell you honestly whether it's worth it for your system.

Are there rebates for cooling tower controllers in California?

Often, yes. Many California water agencies offer rebates for conductivity controllers and other water-saving upgrades. Programs change and many require pre-approval, so ask us before you buy and we'll check what's available.

Find out if your controller is telling the truth.

A Hydrovida tech will check your controller, sensors and feed equipment on-site. No cost, no obligation.